1)Create a program template for startingup communications.
2) Create a directory for each line of binkley that you are going to run.---Starup.cmd---
Rem Always start the High speed lines first.
start /b /fs c:\bink\bink1
start /b /fs c:\binl\bink2
exit
---Starup.cmd--
I have listed two in the above example.MD bink
MD binl
MD binm
3) Put the OS2 version of binkley into the primary directory (bink).Copy all binkley.* to all other directories.
copy binkley.* c:\binl
copy binkley.* c:\binm
4) Make up batch files (.cmd) for bink1.cmd and bink2.cmd in the appropriate directories.
---Bink1.cmd--->Bink
d:
cd\outbound
Rem Clear out busy flags
if exist *.bsy erase *.bsy
:START
Rem USR Dual Standard
MODE COM4:38400,n,8,1,to=on,xon=off,dtr=off,idsr=off,odsr=off,octs=on,rts=hs
c:
cd \bink
Rem Start Binkley Mailer
btp share
Rem Toss Mail to message bases and make packets for other nodes
if errorlevel 99 goto toss
if errorlevel 97 goto toss
if errorlevel 95 goto toss
if errorlevel 60 goto toss
Rem Shutdown for nodelist creation
if errorlevel 55 goto nodelist
Rem Wife is finished with the Voice phone for the night.
if errorlevel 51 goto start3
Rem Pickup OS2 Echos from 81:
if errorlevel 43 goto Raymond
Rem Get Mail from 12/12
if errorlevel 42 goto Ken
Rem Get Region 17 echos
if errorlevel 41 goto Adrian
Rem Create latest and greatest nodelist
if errorlevel 32 goto nodelst
Nightly Cleanup
if errorlevel 31 goto prtlog
Clear out the shareware areas that I passthru.
if errorlevel 30 goto clrout
if errorlevel 20 goto toss
if errorlevel 10 goto start
Rem Weekly Statistics Report
if errorlevel 7 goto stats
if errorlevel 1 goto start
goto start
:TOSS
d:
cd\net
if exist *.tic goto tick
goto squish
:TICK
c:
cd\bink
start /fs /b tick.cmd
:SQUISH
c:
Rem Check for Freq Files
Rem cd\squish
Rem start /b freq CHECK
Rem Mail Toss
cd\squish
Rem If Mail is being tossed then ignore.
if exist *.pkt goto start
:SQSTART
cd\bink
start /fs /b squish.cmd
goto start
:NODELST
c:
cd\temp
erase *.* /n
cd\file\dosdoors
copy files.* c:\temp
erase *.* /n
copy c:\temp\*.*
cd\temp
erase *.* /n
cd\file\win
copy files.* c:\temp
erase *.* /n
copy c:\temp\*.*
cd\temp
erase *.* /n
Rem why not scoop up the bink subdirectory and backup
cd\bink
if not exist backup.flg goto nodeit
Rem backup using fastape for now
c:
cd\temp
erase *.dup
cd\os2
copy *.sys c:\temp
cd mdos
copy *.sys c:\temp
cd..
cd dll
copy *.dll c:\temp
cd\bink
start /f /fs tape.bat
rem slowdown so fastape will work.
:loop
cd\os2
dir
cd\temp
rem when tape backup is complete then this will dissapear.
if exist *.dll goto loop
:NODEIT
d:
cd\net
if exist nodediff.* copy nodediff.* c:\file\xmit
if exist os2list.* copy os2list.* c:\file\xmit
c:
cd\file\xmit
if not exist nodediff.* goto chkos2
d:
cd\nodelist
if exist nodediff.* erase nodediff.*
c:
copy nodediff.* d:\nodelist
:chkos2
if not exist os2list.* goto chknoded
d:
cd\nodelist
if exist os2list.* erase os2list.*
c:
copy os2list.* d:\nodelist
erase os2list.*
:chknoded
Rem if no nodelists then don't start
if not exist nodediff.* goto start
erase nodediff.*
d:
cd\nodelist
ren nodediff.* nodediff.arc
Rem Keep other lines down until Nodelist is complete
copy nodediff.arc c:\temp\node.flg
Rem Force other two nodes down
copy nodediff.arc d:\outbound\forcexit.2
copy nodediff.arc d:\outbound\forcexit.3
c:
cd\temp
:ACK2
dir
if not exist nodeack2.flg goto ack2
:ACK3
dir
if not exist nodeack3.flg goto ack3
d:
arc2 x nodediff.arc
erase nodediff.arc
ren os2list.* os2list.999
fastlstp -dos2list -nos2list
ren nodex.* osex.*
fastlstp
c:
cd\temp
erase node.flg
goto start
:PRTLOG
d:
cd\log
copy binkley.log bt.log
erase binkley.log
c:
cd\max
copy 1 mx1.log
erase 1
cd\squish
erase squish.stt
cd\bink
start /b /dos /fs dailyrpt.bat
:PACKIT
c:
cd\squish
sqpackp c:\msg\*.sqd
erase *.bad
erase *.bak
compress c:\msg\ /s
:CLROUT
d:
cd\outbound
erase *.$$0
c:
cd\squish
Rem If Mail hasn't been tossed then do it.
if exist *.pkt goto sqstart
goto start
:RAYMOND
goto start
:ADRIAN
d:
cd\outbound
Rem Setup 153/752 for transmission
rename 009902F0.HUT 009902F0.CUT
rename 009902F0.HLO 009902F0.CLO
goto start
:KEN
d:
cd\outbound
Rem Setup 12/12 for transmission
rename 000C000C.HUT 000C000C.CUT
rename 000C000C.HLO 000C000C.CLO
goto start
:STATS
d:
cd\nodelist
rem clear out old nodediff for exit 32
erase nodediff.*
c:
cd\bink
start /b /dos /fs weekrpt.bat
cd\squish
erase *.bad
erase *.bak
d:
cd\net
erase *.bad
erase *.s*
c:
areafixp NOTIFY
goto start
:START3
c:
cd\binm
Rem Start the voice line for the evening.
start /b /fs bink3
goto start
:NODELIST
c:
cd\temp
Rem Acknowledge shutdown
copy node.flg nodeack1.flg
Rem wait for nodelist to complete
:ack1
dir
if exist node.flg goto ack1
goto start
:EXIT
cls
exit
---Bink2.cmd--->Binl
:START
Rem Old USR Dual Standard or Most other HS Modems
MODE COM3:38400,n,8,1,to=on,xon=off,dtr=off,idsr=off,odsr=off,octs=on,rts=hs
c:
cd \binl
btp share
if errorlevel 150 goto toss
if errorlevel 99 goto toss
if errorlevel 97 goto toss
if errorlevel 95 goto toss
if errorlevel 60 goto toss
Rem Shutdown for nodelist compile
if errorlevel 55 goto nodelist
Rem Nightly Maint
if errorlevel 31 goto prtlog
if errorlevel 20 goto start
if errorlevel 10 goto scan
if errorlevel 5 goto scan
if errorlevel 4 goto scan
if errorlevel 3 goto scan
if errorlevel 2 goto scan
if errorlevel 1 goto start
goto start
:TOSS
c:
cd\squish
Rem If Mail is being tossed then ignore.
if exist *.pkt goto start
cd\bink
start /fs /b squish.cmd
goto start
:SCAN
c:
cd\squish
Rem If Mail is being tossed then ignore.
if exist *.pkt goto start
cd\bink
start /fs /b squash.cmd
goto start
:PRTLOG
cls
d:
cd\log
copy binklez.log bu.log
erase binklez.log
c:
cd\max
copy 2 mx2.log
erase 2
goto start
:NODELIST
c:
cd\temp
Rem Acknowledge shutdown
copy node.flg nodeack2.flg
Rem wait for nodelist to complete
:ack2
dir
if exist node.flg goto ack2
goto start
:EXIT
cls
exit
-----------
---Bink3.cmd--->Binm
:START
MODE COM2:2400,n,8,1,to=on,xon=off,dtr=off,idsr=off,odsr=off,octs=on,rts=hs
c:
cd \binm
btp share
if errorlevel 150 goto toss
if errorlevel 99 goto toss
if errorlevel 97 goto toss
if errorlevel 95 goto toss
if errorlevel 60 goto toss
if errorlevel 55 goto nodelist
if errorlevel 50 goto exit
if errorlevel 31 goto prtlog
if errorlevel 20 goto start
if errorlevel 10 goto scan
if errorlevel 5 goto scan
if errorlevel 4 goto scan
if errorlevel 3 goto scan
if errorlevel 2 goto scan
if errorlevel 1 goto start
goto start
:TOSS
c:
cd\squish
Rem If Mail is being tossed then ignore.
if exist *.pkt goto start
cd\bink
start /fs /b squish.cmd
goto start
:SCAN
c:
cd\squish
Rem If Mail is being tossed then ignore.
if exist *.pkt goto start
cd\bink
start /fs /b squash.cmd
goto start
:PRTLOG
cls
d:
cd\log
copy binklex.log bu.log
erase binklex.log
c:
cd\max
copy 3 mx3.log
erase 3
goto start
:NODELIST
c:
cd\temp
Rem Acknowledge shutdown
copy node.flg nodeack3.flg
Rem wait for nodelist to complete
:ack3
dir
if exist node.flg goto ack3
goto start
:EXIT
cls
exit
-----------
5) Modify your config.sys file as following. Make sure you have the latest com.sys/vcom.sys for 6.177.
---config.sys---
IFS=C:\OS2\HPFS.IFS /CACHE:256 /CRECL:32
.....
PRIORITY_DISK_IO=NO
TIMESLICE=32,125
BUFFERS=80
.....
DISKCACHE=768,LW,32
MAXWAIT=2
.....
BREAK=OFF
THREADS=256
.....
FCBS=16,8
RMSIZE=640
AUTOFAIL=YES
.....
DEVICE=D:\OS2\POINTDD.SYS
DEVICE=D:\OS2\MOUSE.SYS SERIAL=COM1
DEVICE=D:\OS2\COM.SYS (2,2F8,3) (3,3E8,10) (4,2E8,11)
DEVICE=D:\OS2\MDOS\VCOM.SYS (2,2F8,3) (3,3E8,10) (4,2E8,11)
.....
Rem Tick Needs This in OS/2 for sure
SET TZ=CST6CDT
REM --- NetWare Requester statements BEGIN ---
----------
6) Build a spawnbbs.cmd in each bink subdirectory
-----spawnbbs.cmd--->bink----
C:
CD \Bink
If Exist Echo.Out Del Echo.Out >Nul:
CD \MAX
maxp.exe -b%2 -p%3 -t%4 -n01 -l1 -z\pipe\bbs
If errorlevel 12 Goto Echox
If errorlevel 11 Goto Packem
If errorlevel 5 Goto Local
Goto Exit
:Echox
If Exist C:\Bink\ECHO.OUT SCANBLD USER.BBS AREA.DAT local matrix @C:\Bink\Echo.Out
CD \BINK
:Reecho
If Exist ECHO.OUT VP2 Export %BINKLEY%AREAS.BBS -0 -M 500 -S 0 -F %BINKLEY%Echo.Out -C -Q -O %OUT%
-A ARC2 A5
:REM Severe Error = 2, Partial Export = 1, Goodness = 0.
If ERRORLEVEL 2 Goto SEVEXP1
If ERRORLEVEL 1 Goto SEVPEXP
Goto PURGEM
:SEVEXP1
ECHO Severe Error In POSTTOSS Export
ECHO Severe Error In POSTTOSS Export >> ERROR.LOG
ECHO Severe Error In POSTTOSS Export >d:\Outbound\Export.z
Goto PACKEM
:SEVPEXP
ECHO Partial Export of AREAS.BBS messages.
cd\bink
start /win /b squish.cmd
Goto Reecho
:PURGEM
:REM Now that either ARCMAIL/NETMAIL or ECHOMAIL is all finished...
If Exist c:\Bink\Outbound\E*.z Del c:\Bink\Outbound\E*.z
Goto PACKEM
:PACKEM -- Here to pack up anything in Matrix Mail area.
CD \MAX
If NOT Exist C:\Bink\ECHO.OUT SCANBLDP USER.BBS AREA.DAT local matrix
cd\bink
start /win /b squash.cmd
Goto EXIT
:LOCAL -- Here to scan for local only mail
SCANBLDP USER.BBS AREA.DAT local
:EXIT
c:
Rem Here to create a request message for a file.
CD \SQUISH
If NOT Exist THANKS.$$$ Goto nofreq
Rem Bob Fudges freq program
freq REQ
:nofreq
c:
cd\squish
if exist thanks.$$$ erase thanks.$$$
Rem Make Bink see outbound - it works!
d:
cd\outbound
if exist *.clo move *.clo \outbound
c:
Echo Returning to BinkleyTerm
---spawnbbs.cmd--->binl---
C:
CD \Bink
If Exist Echo.Out Del Echo.Out >Nul:
CD \MAX
maxp.exe -b%2 -p%3 -t%4 -n02 -l2 -z\pipe\bbs1
If errorlevel 12 Goto Echox
If errorlevel 11 Goto Packem
If errorlevel 5 Goto Local
Goto Exit
:Echox
If Exist C:\Bink\ECHO.OUT SCANBLD USER.BBS AREA.DAT local matrix @C:\Bink\Echo.Out
CD \BINL
:Reecho
If Exist ECHO.OUT VP2 Export %BINKLEY%AREAS.BBS -0 -M 500 -S 0 -F %BINKLEY%Echo.Out -C -Q -O %OUT%
-A ARC2 A5
:REM Severe Error = 2, Partial Export = 1, Goodness = 0.
If ERRORLEVEL 2 Goto SEVEXP1
If ERRORLEVEL 1 Goto SEVPEXP
Goto PURGEM
:SEVEXP1
ECHO Severe Error In POSTTOSS Export
ECHO Severe Error In POSTTOSS Export >> ERROR.LOG
ECHO Severe Error In POSTTOSS Export >d:\Outbound\Export.z
Goto PACKEM
:SEVPEXP
ECHO Partial Export of AREAS.BBS messages.
cd\bink
start /win /b squish.cmd
Goto Reecho
:PURGEM
:REM Now that either ARCMAIL/NETMAIL or ECHOMAIL is all finished...
If Exist c:\Bink\Outbound\E*.z Del c:\Bink\Outbound\E*.z
Goto PACKEM
:PACKEM -- Here to pack up anything in Matrix Mail area.
CD \MAX
If NOT Exist C:\Bink\ECHO.OUT SCANBLDP USER.BBS AREA.DAT local matrix
cd\bink
start /win /b squash.cmd
Goto EXIT
:LOCAL -- Here to scan for local only mail
SCANBLDP USER.BBS AREA.DAT local
:EXIT
Rem Here to create a request message for a file.
CD \SQUISH
If NOT Exist THANKS.$$$ Goto nofreq
freq REQ
:NOFREQ
c:
cd\squish
if exist thanks.$$$ erase thanks.$$$
d:
cd\outbound
if exist *.clo move *.clo \outbound
c:
Echo Returning to BinkleyTerm
------------
7) Configure your Binkley.cfg for all lines. My examples are for an HST Dual and HST Round led and a 2400 that I use on the voice line.
---binkley.cfg--->bink---
; ----------------------------------------------------------------------------
; BINKLEY.CFG - Configuration File for BinkleyTerm 2.56
; ----------------------------------------------------------------------------
Snoop \pipe\bbs
Port 4
Baud 38400
Carrier 80
Init |ATZ|~ATH0S0=0&C1&D2B0|
TermInit ATE1|
Prefix ATB1DT
;Suffix ~|
Busy |ATH1~|
Answer ATA|
PreInit |v``^``
StatusLog d:\log\binkley.log
Downloads d:\net\
CaptureFile d:\log\session.log
LogLevel 5
Gong
LockBaud /ARQ
AutoBaud
PollTries 10
;
System Tech Talk Toll 204-269-7373, Wpg. NEC/SDN HST/v42
Sysop Dave Sloan
Domain fidonet fidonet nodex 1 6
Address 1:348/2.0@fidonet ; Default address
Domain os2net os2net osex 81 81
Address 81:950/0.0@os2net.org ; OS2 Net Zone 90
Address 81:950/10.0@os2net.org ; OS2 Net Coordinator
;
MyLocation Winnipeg, MN
MyPhone 1-204-269-7373
MyListFlags CM,XA,V32B,HST
MyMaxBaud 14400
PickUpAll
;
NetMail c:\msg\net\
NetFile d:\net\
Hold d:\outbound\
;
Nodelist d:\nodelist\
Version7
Unattended
; NoFullScreen
BoxType 2
Colors 112 9 10 11 14 12 113 15 ; Requires VFOSSIL
CursorCol 1
CursorRow 1
Okfile c:\max\okfiles.txt
Avail c:\max\tech_all.a~s
About c:\bink\extra.asc
; Added for OS/2 version with Max file areas
FileSec 2
KnownSec 2
ProtSec 2
MaxAreas c:\max\area.dat
;
MaxReq 10
MaxBytes 600000
MaxTime 120
ProtReqList c:\max\download.p
ProtAvail c:\max\downsort.a~p
ReqTemplate c:\bink\sample.tpl
Timeout 20
Banner Welcome to Tech Talk Toll - Canada!
BBSNote Thank you. Now loading BBS. Please wait...
DoingMail Sorry, we're not available right now. Processing mail only.
EnterBBS Please press your Escape key to enter the BBS, or wait a few moments.
; ExtrnMail 140 Gimme UUCP; ExtrnMail 150 Gimme WidgetLink; MailNote Now loading UUCP...please wai
t...
; BBS Exit
BBS Spawn
; Starts the SPAWNBBS %1 %2 %3 %4 %5
; ExtrnMail 'YooHoo String for UUCP'
; Starts the EXTMAIL %1 %2 %3 %4 %5 %6
; Mail Exit spawns extopt.cmd
EXTern spawn
; BBS Batch
AfterMail c:\bink\Squish.cmd
; Force Bink to exit so Nodelist can be run
ForcExit 55
;
Janusbaud 14400
JanusOK /Arq/V32
JanusOK /V32
StartBlkLen 1024
;
TaskNumber 1
Flags d:\outbound
---binkley.cfg--->binl---
Snoop \pipe\bbs1
Port 3
Baud 38400
Carrier 80
Init |ATZ|~ATH0S0=0&C1&D2B1|
TermInit ATE1|
Prefix ATDT
;Suffix ~|
Busy |ATH1~|
Answer ATA|
PreInit |v``^``
StatusLog d:\log\binklez.log
Downloads d:\net\
CaptureFile d:\log\sessiom.log
LogLevel 5
Gong
LockBaud /ARQ
AutoBaud
PollTries 10
System Tech Talk Toll 204-269-7373, Wpg. NEC/SDN HST/v42
Sysop Dave Sloan
Domain fidonet fidonet nodex 1 6
Address 1:348/501.0@fidonet.org ; Default address
Address 1:348/10.0@fidonet.org ; Default address
Address 1:348/2.0@fidonet.org ; Default address
Domain os2net os2net osex 81 81
Address 81:950/21.0@os2net.org ; AKA
MyLocation Winnipeg, MN
MyPhone 1-204-269-1916
MyListFlags CM,XA,V32B,HST
MyMaxBaud 14400
PickUpAll
NetMail c:\msg\net\
NetFile d:\net\
Hold d:\outbound\
Nodelist d:\nodelist\
Version7
Unattended
BoxType 2
Colors 112 9 10 11 14 12 113 15 ; Requires VFOSSIL
Mark_Kromm ; Requires VFOSSIL
CursorCol 1
CursorRow 1
Okfile c:\max\download.n
Avail c:\max\downsort.a~d
About c:\bink\extra.asc
MaxReq 200
MaxBytes 4000000
MaxTime 600
ReqTemplate c:\bink\sample.tpl
Timeout 20
Banner Welcome to Tech Talk Toll - Canada!
BBSNote Thank you. Now loading BBS. Please wait...
DoingMail Sorry, we're not available right now. Processing mail only.
EnterBBS Please press your Escape key to enter the BBS, or wait a few moments.
; ExtrnMail 140 Gimme UUCP
; ExtrnMail 150 Gimme WidgetLink
; MailNote Now loading UUCP...please wait...
; BBS Exit
BBS Spawn
; BBS Batch
; AfterMail Unpack.Bat
; CleanUp Scrub.Bat
; Packer Pack.Bat
; NoWaZOO
; Force Bink to exit so Nodelist can be run
ForcExit 55
;
Janusbaud 2400
; JanusOK /Arq/V32
; JanusOK /V32
;
TaskNumber 2
Flags D:\Outbound---binkley.cfg--->binm---
Snoop \pipe\bbs2
Port 2
Baud 2400
Carrier 80
Init |~ATZ|~~ATH0S0=5|
TermInit ATV1Q0X4E1S0=0|
Prefix ATDT
Busy |~ATH1|~
PreDial `
PreInit |v``^``
StatusLog d:\log\binklex.log
Downloads d:\net\
CaptureFile d:\log\session.log
LogLevel 5
Gong
AutoBaud
PollTries 10
System Tech Talk Toll 204-269-7373, Wpg. NEC/SDN HST/v42
Sysop Dave Sloan
Address 1:348/402.0@fidonet.org ; Default address
NetMail c:\msg\net\
NetFile d:\net\
Hold d:\outbound\
Nodelist d:\nodelist\
Version7
Unattended
BoxType 2
Colors 112 9 10 11 14 12 113 15 ; Requires VFOSSIL
Mark_Kromm ; Requires VFOSSIL
CursorCol 1
CursorRow 1
Okfile c:\max\download.n
Avail c:\max\downsort.a~d
About c:\bink\extra.asc
MaxReq 200
MaxBytes 4000000
MaxTime 600
ReqTemplate c:\bink\sample.tpl
Timeout 20
Banner Welcome to Tech Talk Toll - Canada!
BBSNote Thank you. Now loading BBS. Please wait...
DoingMail Sorry, we're not available right now. Processing mail only.
EnterBBS Please press your Escape key to enter the BBS, or wait a few moments.
BBS Spawn
ForcExit 55
Janusbaud 2400
; JanusOK /Arq/V32
; JanusOK /V32
TaskNumber 3
Flags D:\Outbound
---------------
8) Setup the events for the binkley lines.
---binkley.evt--->bink---
; ----------------------------------------------------------------------------
; BINKLEY.EVT - Event File for BinkleyTerm 2.56
; ----------------------------------------------------------------------------
; Schedule for Tech Talk Toll 348/2
; ----------------------------------------------------------------------------
;
Event All 00:00 04:30 L=0 B E1=20 E2=99 E4=10,TIC A=190 T=3,8 Q=200 ; Latenight
Event All 04:30 04:30 F L=0 E1=42 E2=42 E4=10,TIC ; 12/12
Event Sat 04:30 04:30 F L=0 E1=32 E2=32 E4=10,TIC ; Weekly Nodelist
Event All 04:30 05:00 L>0 N E1=20 E2=99 A=60 T=3,20 ; Poll(NMH)
Event Fri 05:00 05:00 F L=0 E1=7 E2=7 E4=10,TIC ; Weekly Stats
Event All 05:00 06:15 L>0 N E1=20 E2=99 A=60 T=3,20 ; Poll(NMH)
Event All 06:15 20:00 L=0 B E1=20 E2=99 A=190 T=3,8 ; Morning
Event All 20:00 23:00 L=0 B E1=20 E2=99 E4=10,TIC Q=10000 ; Evening
Event All 23:00 23:00 F L=0 E1=31 E2=31 E4=10,TIC ; Pack Base
Event Sun|Tue|Thu 23:00 23:00 F L=0 E1=41 E2=41 E4=10,TIC ; 153/752
Event Mon|Wed|Fri 23:00 23:00 F L=0 E1=43 E2=43 E4=10,TIC ; 81:910/0
Event All 23:00 23:30 L>0 E1=20 E2=99 E4=10,TIC A=60 T=3,12 ; Send out Mail
Event All 23:30 23:30 F L=0 E1=51 E2=51 E4=10,TIC ; Start Voice Line
Event All 23:39 23:39 F L=0 E1=42 E2=42 E4=10,TIC ; 12/12
Event All 23:40 23:59 L>0 E1=20 E2=99 E4=10,TIC Q=15000 A=190 T=3,12 Q=20 ; Until Done---binkley.evt--->binl---
; ----------------------------------------------------------------------------
; BINKLEY.EVT - Event File for BinkleyTerm 2.56
; ----------------------------------------------------------------------------
; Schedule for Tech Talk Toll 348/502
; ----------------------------------------------------------------------------
;
Event All 00:00 02:00 L=0 R B E1=20 E2=99 A=190 T=3,8 ; Day
Event All 02:00 04:31 L=0 B E1=20 E2=99 A=190 T=3,8 ; Day
Event All 04:31 05:30 L=0 R B E1=20 E2=99 A=190 T=3,8 ; Day
Event All 05:30 09:00 L=0 B E1=20 E2=99 A=190 T=3,8 ; Day
Event All 09:00 11:30 L=0 B E1=20 E2=99 A=190 T=3,8 ; Day
Event All 11:30 15:30 L=0 B E1=20 E2=99 A=190 T=3,8 ; Day
Event All 15:30 19:00 L=0 B E1=20 E2=99 A=190 T=3,8 ; Day
Event All 19:00 21:30 L=0 B E1=20 E2=99 A=190 T=3,8 ; Day
Event All 21:30 22:59 L=0 B E1=20 E2=99 A=190 T=3,8 ; Day
Event All 22:59 22:59 F L=0 E1=31 E2=31 E4=10,TIC ; Get rid of log
Event All 22:59 23:59 L=0 R E1=20 E2=99 A=190 T=3,8 ; Day----------
---binkley.evt--->binl---
; ----------------------------------------------------------------------------
; BINKLEY.EVT - Event File for BinkleyTerm 2.56
; ----------------------------------------------------------------------------
; Schedule for Tech Talk Toll 348/402
; ----------------------------------------------------------------------------
;
Event All 00:00 02:00 L=0 R E1=20 E2=99 A=190 T=3,8 ; Mail Runs
Event All 02:00 04:29 L=0 E1=20 E2=99 A=190 T=3,8 ; All
Event All 04:29 05:30 L=0 R E1=20 E2=99 A=190 T=3,8 ; Evening
Event All 05:30 05:30 L=0 E1=50 E2=50 A=10,TIC ; End of Evening
Event All 05:31 23:30 L=0 E1=50 E2=50 E4=10,TIC ; Outa here
Event All 23:31 23:30 F L=0 E1=31 E2=31 E4=10,TIC ; Get rid of log
Event All 23:31 23:59 L=0 E1=20 E2=99 A=190 T=3,8 ; Start Mail Runs
----------
9)set path=c:\bink and run btctl in both subdirectories. Run BTCTL
10) Copy MAX into a temporary directory an run the program that installs it.
11) Add your bulletin and welcome screen to the max\misc subdirectory using
the asc to mec converter. Compile with Meccap.exe
12) Modify all .ctl files in the Max subdirectory. Compile with Siltp.exe
---msgarea.ctl---
Area LOCAL
MsgAccess Normal
Type Squish
MsgInfo Local Message Area
Local C:\Msg\LOCAL
Public Only
End Area
Area PRIVATE
MsgAccess Normal
Type Squish
MsgInfo Private on this BBS
Local C:\Msg\PRIVATE
Public Only
End Area
Area 4SALE
MsgAccess Normal
Type Squish
MsgInfo Buy,Sell,Trade - NonCommercial
EchoMail C:\Msg\4SALE
Public Only
End Area
......
Area NET
Type *.MSG
MsgAccess Privil
MsgInfo NetMail
Matrix C:\Msg\Net
Private Only
Renum Max 100
End Area
Area BAD
Type *.MSG
MsgAccess Sysop
MsgInfo BadMsg
Matrix C:\Msg\Bad
Private Only
End Area......
---filearea.ctl---
Area MISCUTIL
FileAccess Normal
FileInfo Unchecked uploads
Download C:\File\Miscutil
Upload C:\File\MiscutilEnd Area
Area SYSOPS
FileAccess Sysop
FileInfo Fido EMAIL + BBS Software
Download C:\FILE\XMIT
Upload C:\File\Miscutil
End Area
Area 2
.......
---max.ctl---
.....
Task 1
Multitasker Auto
....
Send Break to Clear Buffer
....
Nodelist Version 7
...
Path NetInfo D:\Nodelist\
....
Include Colours.Ctl
Include Reader.Ctl
Include Language.Ctl
Include Msgarea.Ctl
Include Filearea.Ctl--------
13) Check Modem settings
ati5
USRobotics Courier 14400 HST Dual Standard NRAM Settings...DIAL=PULSE B0 F1 M0 X7
BAUD=38400 PARITY=N WORDLEN=8&A3 &B2 &G0 &H1 &I0 &K3 &L0 &M4 &N0
&P0 &R2 &S1 &T5 &X0 &Y0 %R0S02=255 S03=013 S04=010 S05=008 S06=002
S07=060 S08=001 S09=006 S10=010 S11=050
S12=050 S13=004 S15=000 S19=002 S21=010
S22=017 S23=019 S24=150 S26=000 S27=000
S28=008 S29=020 S32=001 S33=000 S34=000
S35=000 S36=000 S37=000 S38=000STORED PHONE #0:
ati5
USRobotics Courier 14400 HST NRAM Settings...DIAL=TONE B1 F1 M0 X7
BAUD=38400 PARITY=N WORDLEN=8&A3 &B2 &G0 &H1 &I0 &J0 &K3 &L0
&M4 &N0 &P0 &R2 &S1 &X0 &Y1S02=255 S03=013 S04=010 S05=008
S06=002 S07=060 S08=002 S09=006
S10=010 S11=070 S12=050 S13=000
S15=000 S19=000 S21=010 S22=017
S23=019 S24=015 S26=001 S27=000
S28=008 S38=000
#3:
14) Convert your user file with the utility provided.
This is for RA -> Max.
15) Add Downsort into the Max subdirectory.
---downsort.cfg---
....
FILFilePath s c:\bink\
......
-------
16)Copy Squish into the Squish subdirectory along with Areafix.
Create a msg subdirectory with net-bad-dupes off of it.
Copy the MSGAPI.DLL to the dll subdirectory off of os2 sub.
---squish.cfg---
Address 1:348/2
Address 1:348/10
Address 81:950/0
Address 81:950/10
NetFile D:\Net
AreasBBS Areas.BBS
Compress Compress.Cfg
Routing Route.Cfg
Outbound D:\Outbound
LogFile d:\Log\Squish.Log
CheckZones
QuietArc
Duplicates 2000
KillDupes
KillBlank
Track D:\log\MsgTrack.Log
Pack LHarc 1:348/302 1:348/405
Pack Zip 1:348/ALL 1:12/12 1:105/200
DefaultPacker Zip
SaveControlInfo
ForwardTo WORLD
BusyFlags
TossBadMsgs
ZoneGate 81:90/1 90/1 348/2 348/10 348/20 348/200 348/502 348/503
Statistics
StripAttributes
MaxMsgs 200
Buffers Large
NetArea NETMAIL C:\Msg\Net
BadArea BAD_MSGS C:\Msg\Bad
DupeArea DUPES C:\Msg\Dupes
EchoArea 4SALE C:\Msg\4SALE -$ -$m50 -$d7
EchoArea 4SALE C:\Msg\4SALE -$ -$m50 -$d7
EchoArea AMIGA C:\Msg\AMIGA -$ -$m50 -$d7
EchoArea AMIGAGAMES C:\Msg\AMIGAGAM -$ -$m50 -$d7
EchoArea AMIGA_COMMS C:\Msg\AMIGA_CO -$ -$m50 -$d7
EchoArea AMIGA_MUSIC C:\Msg\AMIGA_MU -$ -$m50 -$d7
EchoArea AMIGA_PDREVIEW C:\Msg\AMIGA_PD -$ -$m50 -$d7
....
EchoArea OS2-CANADA C:\Msg\OS2-CAN -$ -$m250 -$d7 -p81:90/10
EchoArea OS2-INSTALL C:\Msg\OS2-INS -$ -$m250 -$d7 -p81:90/10
EchoArea OS2-JOBS C:\Msg\OS2-JOB -$ -$m250 -$d7 -p81:90/10
EchoArea OS2-NEWUSER C:\Msg\OS2-NEW -$ -$m250 -$d7 -p81:90/10
....---areas.bbs--->squish
Tech Talk Toll BBS * Winnipeg, Manitoba! Dave Sloan
$C:\Msg\4SALE 4SALE 1:348/1 20 205 300 401 600 700
$C:\Msg\AMIGA AMIGA 1:12/12 348/1 205 600 700
$C:\Msg\AMIGAGAM AMIGAGAMES 1:12/12 348/1 205 600 700
$C:\Msg\AMIGA_CO AMIGA_COMMS 1:12/12 348/1 20 205 600 700
$C:\Msg\AMIGA_MU AMIGA_MUSIC 1:12/12 348/1 205 600 700
$C:\Msg\AMIGA_PD AMIGA_PDREVIEW 1:105/200 348/1 205 600 700
.....
$C:\Msg\OS2-CAN OS2-CANADA 81:90/1 81:950/10 22 23 40
$C:\Msg\OS2-INS OS2-INSTALL 81:90/1 81:950/10 22 23 40
$C:\Msg\OS2-JOB OS2-JOBS 81:90/1 81:950/10 22 23 40
$C:\Msg\OS2-NEW OS2-NEWUSER 81:90/1 81:950/10 22 23 40
---areafix.ctl--->squish
Address 1:348/2
Aka 81:950/10
Aka 1:348/402
NetMail C:\Msg\Net
AreasFile C:\Squish\Areas.Bbs
SystemType ConfMail
Sysop Dave Sloan
LogFile D:\Log\Areafix.Log
LogAllChanges
ShortForm
Alias AutoEcho
Alias AutoFix
NewAreasProcess
NewAreasPath C:\Msg
NewAreasNodes 1:12/12 348/1 205
NewAreasCreate 348/1 348/20 348/205 348/401 348/405 348/700
Password 348/1 xxxxx 99
Password 348/20 yyyyyy 99
% Area Level
% ------- ---------------- -----
Protect CELLBLK17 250
Protect TCONNECT 250
ShowFeeds
SaveProcessedMsgs
NotifyExclude 12/12 153/752 81:90/10
RemoteDeletionNotify.....
17) Create a few .cmd files in bink.
18) Build your arc subdirectory:---squish.cmd--->bink
Rem (toss)
c:
cd\squish
set path=c:\arc
squishp in out squash link
areafixp EC
exit
---squash.cmd--->bink
Rem (scan)
c:
cd\squish
squishp squash
exit
---tick.cmd--->bink
c:
cd\bink
tickp
exit
---max4test--->bink
C:
CD \Bink
If Exist Echo.Out Del Echo.Out >Nul:
CD \MAX
maxp -n04 -l4 -uq
:EXIT
---compress.cfg--->squish
Archiver ARC
Extension ARC
Ident 0,1a
OS2 Add arc2 a5 %a %f
OS2 Extract arc2 xw %a %f
OS2 View arc2 l %a
End Archiver
Archiver PAK
OS2 Extension PAK
OS2 Ident -2,fe
OS2 Add arc a %a.pak %f
OS2 Extract arc e %a.pak %f
OS2 View arc v %a.pak
End Archiver
Archiver ZIP
Extension ZIP
Ident 0,504b0304 ; "PK^c^d"
Add pkzip -a %a %f
Extract pkunzip -n %a %f
; Extract unzip -o %a %f
View pkzip -v %a
End Archiver
Archiver LH113
Extension LZH
Ident 2,2d6c68 ; "-lh"
OS2 Add lh a %a %f /c
OS2 Extract lh x %a %f /o
OS2 View lh v %a
End Archiver
Archiver LHarc
Extension LZH
Ident 2,2d6c68 ; "-lh"
OS2 Add lh a %a %f /i /v
OS2 Extract lh x %a %f
OS2 View lh v %a
End Archiver
DOS Archiver ZOO
OS2 Extension ZOO
OS2 Ident 0,5a4f4f ; "ZOO"
OS2 Add zoo a: %a %f
OS2 Extract zoo e:O %a %f
OS2 View zoo v %a
OS2 End Archiver
Archiver ARJ
Extension ARJ
Ident 0,60ea
OS2 Add --- arj not supported under OS/2 ---
OS2 Extract unarj e %a %f
OS2 View unarj l %a
End Archiver
-----------
---tic.cfg--->bink
IN D:\Net\
ZONE 1 D:\Outbound\
NET 348
NODE 2
AKA 81:950/10
HOLD D:\Tic\
QDIR C:\Bink\
; * accept files from this node
; & never send to this node he's your feed
; C send crash to this node
; H send hold
; F send FLE file to this node
; A0 - AF send from AKA 1-15AREA C:\FILE\SOFTD SOFTDIST
1:348/205 PASS123 *&AREA C:\FILE\SDSBN SDSBINK
1:348/302 PASS321 H
1:348/205 PASS123 *&AREA C:\FILE\DVN DVN348
1:348/302 PASS321 H
1:348/205 PASS123 *&AREA C:\FILE\WIN WIN348
1:348/205 PASS123 *&AREA C:\FILE\PDNCEE PDNCEE
1:348/302 PASS321 H
1:348/205 PASS123 *&AREA C:\FILE\PDNWIN PDNWIN
1:348/302 PASS321 H
1:348/205 PASS123 *&AREA C:\FILE\PDNPASCL PDNPASCL
1:348/205 PASS123 *&AREA C:\FILE\PDNBASIC PDNBASIC
1:348/302 PASS321 H
1:348/205 PASS123 *&AREA C:\FILE\PDNASM PDNASM
1:348/205 PASS123 *&AREA C:\FILE\PDNLANG PDNLANG
1:348/205 PASS123 *&AREA C:\FILE\PDNNEWS PDNNEWS
1:348/205 PASS123 *&AREA C:\FILE\PDNDBASE PDNDBASE
1:348/302 PASS321 H
1:348/205 PASS123 *&AREA C:\FILE\PDNGNDOS PDNGNDOS
1:348/205 PASS123 *&AREA C:\FILE\PDNOTHER PDNOTHER
1:348/205 PASS123 *&AREA C:\FILE\PDNBATCH PDNBATCH
1:348/205 PASS123 *&AREA C:\FILE\XMIT ECHOLIST
1:348/205 PASS123 C
1:12/12 PASS111 *&AREA C:\FILE\XMIT FTSC
1:348/205 PASS123 C
1:153/752 PASS222 *&AREA C:\UTILNET UTILNET
1:348/302 PASS321 H
1:348/205 PASS123 *&AREA C:\FILE\SDSOS2 SDSOS2
1:348/205 PASS123 *&AREA C:\FILE\OS2NEW OS2NEW
1:348/205 PASS123 *&AREA C:\FILE\FWAPPS FWAPPS
1:348/205 PASS123 *&AREA C:\FILE\FWCOMM FWCOMM
1:348/205 PASS123 *&AREA C:\FILE\FWGRAPHX FWGRAPHX
1:348/205 PASS123 *&AREA C:\FILE\FWFONTS FWFONTS
1:348/205 PASS123 *&AREA C:\FILE\FWUTILS FWUTILS
1:348/205 PASS123 *&AREA C:\FILE\FWLAN FWLAN
1:348/205 PASS123 *&AREA C:\FILE\FWDRIVRS FWDRIVRS
1:348/205 PASS123 *&AREA C:\FILE\FWGAMES FWGAMES
1:348/205 PASS123 *&AREA C:\FILE\SDN_COMM SDN_COMM
1:348/302 PASS321 H
1:348/205 PASS123 *&AREA C:\FILE\SDN_LANG SDN_LANG
1:348/302 PASS321 H
1:348/205 PASS123 *&AREA C:\FILE\SDN_UTIL SDN_UTIL
1:348/302 PASS321 H
1:348/205 PASS123 *&AREA C:\FILE\SDN_DATA SDN_DATA
1:348/302 PASS321 H
1:348/205 PASS123 *&AREA C:\FILE\SDN_MISC SDN_MISC
1:348/302 PASS321 H
1:348/205 PASS123 *&AREA C:\FILE\SDN_BUSI SDN_BUSI
1:348/302 PASS321 H
1:348/205 PASS123 *&AREA C:\FILE\SDN_WORD SDN_WORD
1:348/302 PASS321 H
1:348/205 PASS123 *&AREA C:\FILE\SDN_OTHR SDN_OTHR
1:348/302 PASS321 H
1:348/205 PASS123 *&AREA C:\FILE\SDN_GAME SDN_GAME
1:348/302 PASS321 H
1:348/205 PASS123 *&AREA C:\FILE\SDN_SYST SDN_SYST
1:348/302 PASS321 H
1:348/205 PASS123 *&AREA C:\FILE\SDN_GRAP SDN_GRAP
1:348/302 PASS321 H
1:348/205 PASS123 *&AREA C:\FILE\SDN_TEXT SDN_TEXT
1:348/302 PASS321 H
1:348/205 PASS123 *&AREA C:\FILE\DDSDOORS DDSDOORS
1:348/302 PASS321 H
1:348/205 PASS123 *&AREA C:\FILE\XMIT FIDONEWS
1:348/302 PASS321 H
1:153/752 PASS222 *&AREA C:\FILE\XMIT NODEDIFF
1:348/205 PASS123
1:153/752 PASS222 *&AREA C:\FILE\XMIT FILEBONE
1:348/205 PASS123 C
1:153/752 PASS222 *&AREA C:\FILE\XMIT REC17
1:348/205 PASS123 C
1:153/752 PASS222 *&AREA C:\FILE\XMIT NET
1:348/1 PASS999 *&TEMP C:\Temp\
STOPDUP C:\Temp\
NoWait
ListFmt %100:31%3:-12 %1:-48.2
QUIET
FLEA
LOGPATH D:\Log\
-----------
---fastlst.cfg--->nodelist
Address 1:348/2.0 ; Your network address (4D)
Country 1- ; Your country code (Intl phone code: 1- for the USA)
MaxBaud 38400 ; Your highest baud rate (as in your nodelist entry)
TmpPath c:\temp ; Path for temporary files: please be sure there is
AutoErase ; Delete old nodelist and nodediff after applying nodediff
Dash2Comma ; Change dashes to commas in the phone number
Version7 ; Generate Version 7 format files
FidoUserLst ; Generate fidouser.lst text list of sysop names
SysopNdx ; Generate SYSOP.NDX (version 7 sysop name list)
Interlist ; Put all zones in above sysop lists,
PASSWORD 153/752 ABCD
PASSWORD 348/1 RSTU
PASSWORD 348/20 WXYZ
TypeDef HST 1 ; Set bit 0 of modem_type byte when HST flag is present
TypeDef PEP 2 ; Set bit 1 of modem_type byte when PEP flag is present
TypeDef V32 4 ; Set bit 2 of modem_type byte when V32/V32B flag is present
TypeDef V32B 8 ; Set bit 3 of modem_type byte when V32B flag is present
;TypeDef MNP 16 ; Set bit 4 of modem_type byte when MNP flag is present
TypeDef V42 16 ; Set bit 4 of modem_type byte when V42/V42B flag is present
COST 27 250 ; charge a penny if it isn't local, $2.50 if it is international
1-204-694- 0
1-204-663- 0
...
1-204-885- 0
1-204-888- 0
1-503 21
1-613 16
1-604 16
1-800 0
END
;
DIAL / 011- ;Add 011- to international
1-204-694- 694-
1-204-663- 663-
1-204-253- 253-
...
1-204- 1-
1- 1-
END
-----------
19) And install your favorite fix for GAcom177b.zip
os2krnl.zip
HPFS.ARJ
20) And hit the reset button when using an OLD AMI BIOS from the start of 1991 back.
21) And that's it! Good luck!
Programs to get before starting:
COM177B ZIP 20239 2-21-92
4:30p
OS2KRNL ZIP 455907 6-19-92
8:53p
HPFS ARJ 65755
7-20-92 8:16a
OS/2 files available for download or file request on Fernwood
Fidonet 1:141/109 (203) 483-0348 HST DS v.32bis v.42bis
Fidonet 1:141/209 (203) 481-7934 HST 14.4 v.42bis
LH2_214.ZIP 35K 7-01-92 LH2 2.14 file
compressor/decompressor. OS/2
version. Works with files with
ZOO21E.EXE 319K 11-01-91 ZOO Version 2.1 ported
to OS/2 by K. U. Rommel.
Source included.
BTP256.LZH 171K 6-21-92 BinkleyTerm for
OS/2, version 2.56 Wide Beta.
COMM2211.ZIP 187K 9-21-92+ Latest combeta, fixes blowoff
due to te/2 bug
-Maximus 2.00 for DOS requires the following files, with Squish being
optional:
MAX200-1.LZH 295K 11-06-91 Maximus BBS 2.0-DOS 1/4
MAX200-2.LZH 159K 11-06-91 Maximus BBS 2.0-DOS 2/4
MAX200-3.LZH 145K 11-06-91 Maximus BBS 2.0-DOS 3/4
MAX200-4.LZH 310K 11-06-91 Maximus BBS 2.0-DOS 4/4
-The OS/2 version of 2.0 (requires MAX200-3.LZH and MAX200-4.LZH ALSO):
MAX200P1.LZH 339K 11-06-91 Maximus BBS 2.0-OS2 1/2 (MAX200-3
and 200-4 req'd)
MAX200P2.LZH 161K 11-06-91 Maximus BBS 2.0-OS2 2/2
MAXCOM22.LZH 4K 11-24-91 Updated version of
MAXCOMM.DLL for OS/2.
MAXP201B.LZH 470K 2-27-92 Maximus 2.01 wide beta
for OS/2. REQUIRES 2.0
INSTALLATION.
- Squish 1.01 release is here. This does not require installation
of a prior
-
version of squish. Also, the distribution restrictions which
-
pertain to Maximus do not pertain here.
SQSHP101.LZH 274K 3-04-92 Squish version 1.01 for
OS/2.
PKZ102-2.EXE 253K 10-01-89 Version 1.02 of PKZIP/UNZIP
for OS/2
TICP210.LZH 115K 4-21-92 OS/2 version of TICK
version 2.10 release. Hatch
is also included.
UNARJ.LZH 42K 12-28-91 An un-arj
for OS/2 from Scott Dudley.
RAIDP100.LZH 89K 12-08-90 OS/2 version of RAID, Fidonet
Utility.
DWNSRT55.ZIP 103K 1-31-92 Maximus CBCS DOWNload file
SORT and List V5.5
(OS/2+DOS)
MSQ21AP.LZH 113K 7-12-92 MSGED/Sq for OS/2
version 2.1a. A
Maximus-compatible message editor.
AFP_120.LZH 52K 11-14-90 Areafix 1.2 for OS/2.
Permits systems that do
echomail with yours to change their complement of
areas independently.
FLST105P.LZH 43K 6-02-92 Fastlist version 7
nodelist compiler version 1.05
for OS/2.
MSGPST10.LZH 41K 1-10-92 Creates Messages from
Text File - Squish or *.MSG
OS2YOU27.ZOO 232K 5-23-92 OS2YOU v2.7 Remote Access
to OS/2 & DOS
COMPRESS.ZIP 8K 2-18-91 Defragment HPFS
partitions.